《電子技術應用》
您所在的位置:首頁 > 电源技术 > 设计应用 > 车载燃料电池发动机交流阻抗测量系统设计及应用*
车载燃料电池发动机交流阻抗测量系统设计及应用*
2023年电子技术应用第8期
王海平,赵兴旺,李飞强
(北京亿华通科技股份有限公司,北京 100192)
摘要: 为解决车载质子交换膜燃料电池发动机在-30℃低温冷储存及冷启动问题,提出了一种测量车载燃料电池发动机单片交流阻抗的测量系统,单片电流电压信号通过带通滤波电路处理后,进行快速傅里叶变换计算出单片阻抗;在采集阻抗时,通过另外一个控制核心采集单片电压,实现了单片电压及阻抗的同步双采集。在系统关机策略中,将单片阻抗作为关机判据,在其达到低温储存及冷启动的阈值点后,系统停止吹扫完成关机。系统能够在-30℃低温储存及冷启动,并最终在北京2022冬奥会实车批量应用。
中圖分類號:TP29 文獻標志碼:A DOI: 10.16157/j.issn.0258-7998.233706
中文引用格式: 王海平,趙興旺,李飛強. 車載燃料電池發動機交流阻抗測量系統設計及應用[J]. 電子技術應用,2023,49(8):70-75.
英文引用格式: Wang Haiping,Zhao Xingwang,Li Feiqiang. Design and application of AC impedance measurement system for vehicle fuel cell engine[J]. Application of Electronic Technique,2023,49(8):70-75.
Design and application of AC impedance measurement system for vehicle fuel cell engine
Wang Haiping,Zhao Xingwang,Li Feiqiang
(Beijing Sinohytec Co.,Ltd.,Beijing 100192, China)
Abstract: In order to solve the problem of low-temperature cold storage and cold start of vehicle-mounted proton exchange membrane fuel cell engine at -30°C, this paper proposes a measurement system for measuring the monolithic AC impedance of on-board fuel cell engine. The monolithic current and voltage signals are processed by a band-pass filter circuit, and the monolithic impedance is calculated by a fast Fourier transform. When collecting impedance, the monolithic voltage is collected through another control core, realizing simultaneous dual collection of monolithic voltage and impedance.In the system shutdown strategy, the monolithic impedance is used as the shutdown criterion, and after it reaches the threshold point of low temperature storage and cold start, the system stops purging and completes shutdown. The system can be stored at -30°C and cold started, and finally used in batch applications at the Beijing 2022 Olympic Winter Games.
Key words : fuel cell engine;AC impedance;cold start;bandpass filter;fast Fourier transform

0 引言

目前燃料電池交流阻抗測量主要應用在實驗室內,商用電化學工作站常用來測量燃料電池內阻。菊水電化學工作站KFM2150控制電子負載施加電流激勵信號給燃料電池,控制2151采集燃料電池單片電壓,電子負載和KFM2151聯合實現電壓和電流同步測量和阻抗計算。電化學工作站體積大,無法應用在整車上。



本文詳細內容請下載:http://m.ihrv.cn/resource/share/2000005493




作者信息:

王海平,趙興旺,李飛強

(北京億華通科技股份有限公司,北京 100192)

微信圖片_20210517164139.jpg

此內容為AET網站原創,未經授權禁止轉載。

相關內容