《電子技術應用》
您所在的位置:首頁 > 其他 > 设计应用 > 基于PowerPC架构的波束指向算法的优化
基于PowerPC架构的波束指向算法的优化
2021年电子技术应用第3期
雷淑岚,吴会祥,李文学
中国电子科技集团公司第五十八研究所,江苏 无锡214063
摘要: 基于PowerPC架构提出了一种波束指向算法的优化策略,分别从三角函数的速算优化、浮点数运算的优化、循环嵌套优化、基于PowerPC指令集的优化等方面来实现。通过提出的优化算法,算法处理时间缩短为原来的十分之一。提出的优化策略对其他平台算法开发和优化也具有一定的指导和借鉴意义。
中圖分類號: TN492
文獻標識碼: A
DOI:10.16157/j.issn.0258-7998.200944
中文引用格式: 雷淑嵐,吳會祥,李文學. 基于PowerPC架構的波束指向算法的優化[J].電子技術應用,2021,47(3):79-82,90.
英文引用格式: Lei Shulan,Wu Huixiang,Li Wenxue. Optimization of beam pointing algorithm based on PowerPC[J]. Application of Electronic Technique,2021,47(3):79-82,90.
Optimization of beam pointing algorithm based on PowerPC
Lei Shulan,Wu Huixiang,Li Wenxue
The fifty-eighth Research Institute of China Electronic Technology Group Corporation,Wuxi 214063,China
Abstract: Based on PowerPC architecture, this paper proposes an optimization strategy of beam pointing algorithm, which is realized from the trigonometric function calculation optimization, floating point arithmetic optimization, loop nesting optimization, and PowerPC instruction optimization. Through the optimization algorithm proposed in this paper, the processing time of the algorithm is reduced to one tenth of the original. At the same time, the optimization strategy proposed in this paper also has certain guidance and reference for the algorithm development and optimization of other platforms.
Key words : beam pointing;PowerPC architecture;CORDIC algorithm;instruction set

0 引言

    波束指向算法主要完成在已知衛星大地坐標系的經度、緯度、高度(long、lati、heig),無人機大地系坐標系的經度、緯度、高度(long、lati、heig),飛機俯仰角、橫滾角、航向角(p、r、y)的情況下,天線陣面中心在機體直角坐標系中的位置(Xb、Yb、Zb),計算衛星在天線球坐標系中的方位角、俯仰角(θ、φ),從而進行收發天線的波束對準[1]。本文主要是基于PowerPC460架構處理器對波束指向算法進行合理的優化,以期在算法的實時性處理上有所優化。本文從四個方面對波束指向算法進行優化:(1)基于CORDIC算法設計的硬件電路實現三角函數的速算優化;(2)浮點數運算的優化;(3)循環嵌套優化;(4)基于PowerPC指令集的優化。




本文詳細內容請下載:http://m.ihrv.cn/resource/share/2000003440




作者信息:

雷淑嵐,吳會祥,李文學

(中國電子科技集團公司第五十八研究所,江蘇 無錫214063)

此內容為AET網站原創,未經授權禁止轉載。