《電子技術應用》
您所在的位置:首頁 > 其他 > 设计应用 > 纯电动智能汽车制动防抱死系统控制逻辑研究
纯电动智能汽车制动防抱死系统控制逻辑研究
2022年电子技术应用第1期
刘 斌,施 卫,常嘉伟,李展峰
江苏理工学院 机械工程学院,江苏 常州213000
摘要: 线控制动技术(Brake-by-Wire)是纯电动智能汽车的关键技术之一。为了提高智能驾驶汽车制动的安全稳定性,需要针对一款纯电动智能汽车的制动防抱死系统控制逻辑进行研究。在该方案实施前,设置合理的逻辑门限值,通过Stateflow进行仿真实验。基于Simulink搭建了8自由度的车辆动力学模型,对弯道制动工况进行仿真,通过控制车辆的横摆力矩实现车辆的差动控制。通过仿真实验,验证了提出的制动防抱死系统控制逻辑的合理性,对后续的线控制动系统的研发具有指导意义。
中圖分類號: TN108.4;U463.5
文獻標識碼: A
DOI:10.16157/j.issn.0258-7998.211683
中文引用格式: 劉斌,施衛,常嘉偉,等. 純電動智能汽車制動防抱死系統控制邏輯研究[J].電子技術應用,2022,48(1):100-104.
英文引用格式: Liu Bin,Shi Wei,Chang Jiawei,et al. Research on control logic of anti-lock braking system of pure electric smart car[J]. Application of Electronic Technique,2022,48(1):100-104.
Research on control logic of anti-lock braking system of pure electric smart car
Liu Bin,Shi Wei,Chang Jiawei,Li Zhanfeng
School of Mechanical Engineering,Jiangsu University of Technology,Changzhou 213000,China
Abstract: Brake-by-wire technology is one of the key technologies of pure electric smart cars. In order to improve the safety and stability of automobile braking, it is necessary to study the control logic of the anti-lock braking system of a pure electric smart car. Before the implementation of this program, a reasonable logic threshold is set for simulation experiments. In this paper, a vehicle dynamics model with 8 degrees of freedom is built based on Simulink to simulate the braking conditions in a curve, and the differential control of the vehicle is realized by controlling the yaw moment of the vehicle. Through simulation experiments, the rationality of the proposed anti-lock braking system control logic is verified, which has guiding significance for the subsequent research and development of brake-by-wire systems.
Key words : pure electric smart car;anti-lock brake system;corner braking;logic threshold control;differential control

0 引言

    汽車未來的發展趨勢是電動化、智能化、共享化以及網聯化。智能汽車需要感知、控制決策、執行等相關技術匹配,新型智能線控底盤是智能汽車的關鍵技術。線控制動(Brake-by-Wire)技術是智能線控底盤的關鍵技術,包含傳統制動技術,基于動力學、運動學、電控等多學科融合技術,技術壁壘較高[1]。由于傳統的制動系統不能實現自主制動,無法滿足智能電動汽車對制動系統的智能電動化要求,無法實現對制動壓力的快速精確控制,為此本文在傳統制動系統上進行改造來滿足智能電動汽車對制動系統的需求[2]。




本文詳細內容請下載:http://m.ihrv.cn/resource/share/2000003917




作者信息:

劉  斌,施  衛,常嘉偉,李展峰

(江蘇理工學院 機械工程學院,江蘇 常州213000)





wd.jpg

此內容為AET網站原創,未經授權禁止轉載。

相關內容